European Wall Switch Socket JY Series
Product Description
 |
One way switch Material:PC/ABS Volume:54x30x50mm Gw/Nw:19kg/17kg Color:White Power:10/16A,250v Certificates CE |
 |
Two way switch Material:PC/ABS Volume:54x30x50mm Gw/Nw:19kg/17kg Color:White Power:10/16A,250v Working Temperature -20°C – +40°C |
 |
One way switch with light Material:PC/ABS Volume:54x30x50mm Gw/Nw:19.5kg/17kg Color:White Power:10/16A,250v Warranty 10 years |
 |
Two way switch with light Material:PC/ABS Volume:54x30x50mm Gw/Nw:20.5kg/18.5kg Color:White Power:10/16A,250v Features:Security |
 |
1 Gang 1 wang switch Material:PC/ABS Volume:54x30x50mm Gw/Nw:19kg/17kg Color:White Power:10/16A,250v Function:Fire prevention,high temperature resistant |
 |
2 Gang 2 way switch Material:PC/ABS Volume:54x30x50mm Gw/Nw:19.5kg/17.5kg Color:White Power:10/16A,250v Life:100000 times |
 |
Doorbell switch Material:PC/ABS Volume:54x30x50mm Gw/Nw:19kg/17kg Color:White Power:10/16A,250v Function:Waterproof |
 |
Dimmer switch Material:PC/ABS Volume:54x30x50mm Gw/Nw:21kg/19kg Color:White Power:10/16A,250v Function:Prevent electric arc |
 |
Socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:18kg/16kg Color:White Power:10/16A,250v |
 |
Schuko socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:19kg/17kg Color:White Power:10/16A,250v |
 |
Double socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:20kg/18kg Color:White Power:10/16A,250v |
 |
Double schuko socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:21kg/19kg Color:White Power:10/16A,250v |
 |
Schuko socket with cover Material:PC/ABS Volume:54x30x50mm Gw/Nw:20kg/18kg Color:White Power:10/16A,250v |
 |
French socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:21kg/19kg Color:White Power:10/16A,250v |
 |
Tv socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:18kg/16kg Color:White Power:10/16A,250v |
 |
Tel socket Material:PC/ABS Volume:54x30x50mm Gw/Nw:19kg/17kg Color:White Power:10/16A,250v |
| The additional lightning protection function protects life and life safety and provides an additional layer of protection to effectively reduce the damage caused by lightning strikes and overvoltages to people and property.Unique structural design and accurate plugging and unplugging fit. There are just two main methods of wiring socket switches, one using a switch to control the socket and one using a switch to control the light. The application of the two methods depends entirely on the wiring method. Requirements for switch and socket wiring: The switch and socket wiring must be secure. The so-called switch and socket wiring is generally installed using copper wire inserted and then fastened using screws, so the screws must be fastened in place during installation. For each socket installed, we have to try to see if the link is loose, any loose link is unqualified. The exposed length of the copper wire meets the requirements. For the installation of our switches and sockets, it is necessary to strip the insulation off the outside of the copper wire and insert it into the wiring hole. Therefore, the length of the exposed copper wire must be in accordance with the requirements. Try to avoid bare copper wires on the outside of the wiring end, and make sure to measure the length when wiring, and do not strip the insulation arbitrarily. The thread colour is as required. When we install switches and sockets, we must connect the wires in the right colour. For example, in a switch there is usually a fire wire, which is one of yellow, green or red, and a white control wire, in which is also the fire wire. For sockets, there are at least three wires, a fire wire, a zero wire and an earth wire. For the ground and zero wires a two-coloured wire and a light blue one must be used, and the fire wire is the colour of the fire wire at home. |
|||
Write your message here and send it to us
